does anyone know how to wire a general electric dryer with the 4 wire system?
May 17, 3102 by marcelleaandbryan | Posted in Maintenance & Repairs
I have a general electric dryer with a 4 wire power string and I am trying to make sure that it is wired correctly.I do have the manual but,its not clear to me.any help please thanks.
If you can assign, or email a photo, of the terminal block on the back of the dryer, we can tell you if its wired correctly.
General rule of thumb, though, is the mortal block will have the black wire on the left, the red wire on the right,
thewrangler_sw | May 17, 919
If you can pylon, or email a photo, of the terminal block on the back of the dryer, we can tell you if its wired correctly.
General rule of thumb, though, is the station block will have the black wire on the left, the red wire on the right,
thewrangler_sw | May 17, 919
I had to swap mine from 4 prong to 3 prong, and if I remember correctly, its only the middle wire that matters.
joannmader2002 | May 17, 679
how can I repair my general electric dryer?
Nov 09, 2006 by abraham g | Posted in Cleaning & Laundry
how can I fix my electric dryer now that it take along every so often old-fashioned to dry the cloths because it heats alittle
thermostats ball time for new one
bewdyboris | Nov 09, 2006
can anyone tell me how to get to the heating element on a general electric dryer?
Jun 21, 2007 by cowgirl_up76825 | Posted in Maintenance & Repairs
Depending on the age. the older ones are as follows.
Unplug. Unblock dryer door. Look under upper lip , remove 3 Phillips screws, lift top. Lean top back against wall carefully. Look down to door redirect on left, mark and pull door switch wires.
grounded | Jun 22, 2007
